How to join audio files into one (MP3, M4A, WAV)
To join audio files, put them in order and save them as one file. MP3s with the same sample rate can be joined frame by frame on tuul.io/merge-mp3/, with nothing re-encoded and no quality lost; files in different formats, or joins with a crossfade or evened-out volume, go to tuul.io/audio-joiner/, which saves them once as MP3, M4A or WAV. Both work on a phone or a computer and upload nothing.
The short version
- Only MP3s? Open tuul.io/merge-mp3, add the MP3s, put them in order (Sort by name for numbered chapters) and press Join.
- Different formats, or a crossfade? Open tuul.io/audio-joiner, add the files (MP3, M4A, WAV, FLAC, OGG, Opus), choose what comes between them and press Join.
- Listen with Play here, then download the file, or on a phone Save or share it.
The line above Join says, before you press it, whether the files are joined as they are or saved again, and why.
Joined as they are, or saved again
An MP3 is a long run of small frames, each a few hundredths of a second of sound with its own header. MP3s with the same sample rate (44.1 kHz for most music) and the same number of channels can be joined by putting their frames one after the other: nothing is decoded or encoded, so nothing changes, and even hours of audio are joined at once. Their bitrates may differ; the joined MP3 gets a new header that counts every frame, so players show the full length and seek to the right place.
Anything else has to be decoded and saved once: an MP3 next to an M4A voice memo, MP3s at 44.1 and 48 kHz, a crossfade (the ends of two files are mixed) or evened-out volume (every sample is changed). The audio joiner then saves one file at the best bitrate among the inputs, so a 320 kbps song stays 320 kbps and nothing sounds worse than its source.
Voice memos and voice notes
- iPhone Voice Memos. Tap a recording, tap the More button, Share, then Save to Files. Apple’s Voice Memos shares a recording as a single .m4a file. Add the saved files on tuul.io/audio-joiner/.
- WhatsApp voice notes are .opus files. Save them first as described in How to save a WhatsApp voice message as MP3, then add them to the audio joiner; the result is an MP3 that plays everywhere.
- Recordings made at different levels (one close to the phone, one across the room): tick Even out the volume. Each file is measured and turned up or down to the same loudness, never clipping. In a test, a recording at -31.4 LUFS between two songs at -17 LUFS was raised by 14.3 dB, and all three came out at -17.1 LUFS.
Audiobooks and long recordings
Chapter files from one audiobook almost always share their settings, so Merge MP3 joins them frame by frame however long they are: it only lists the frames, it doesn’t decode them, and the joined file is assembled from the originals on your device. Sort by name puts “Chapter 2” before “Chapter 10”. If you need only part of the result afterwards, MP3 cutter cuts it on its frames too.
The tiny pause at the joins
Every MP3 encoder adds a few hundredths of a second of silence at the start of a file and pads its end to a whole frame. When MP3s are joined frame by frame, those stay: about 0.04 to 0.05 seconds at each join (measured 41.6 and 49.0 ms with LAME files). That’s unnoticeable between songs. For a seamless join, such as a recording split into parts, use the audio joiner with a crossfade, or tick Even out the volume: the file is then decoded and saved again as one continuous recording, without those pauses.
Sources
- Apple Support: Share a recording in Voice Memos on iPhone: Share, and “Rendered: Create a single .m4a file”.
- MP3’ Tech: MPEG audio frame header: how each frame’s length follows from its bitrate and sample rate.
- Gabriel Bouvigne: Mp3 Info Tag revision 1 specifications: the header with the frame count and seek table, and the encoder delays.
- FFmpeg: the ebur128 filter: loudness measured the EBU R128 way.
Questions
How do I join two MP3 files without losing quality?
Join them frame by frame instead of saving them again. On tuul.io/merge-mp3/, MP3s with the same sample rate are put one after the other as they are, with a new header for the full length, so the joined MP3 sounds exactly like the originals. Different bitrates are fine.
How do I combine voice memos on an iPhone?
In Voice Memos, tap a recording, tap the More button, then Share and Save to Files (it's shared as an .m4a file); do the same for the others. Then open tuul.io/audio-joiner/ in Safari, choose the files from Files, put them in order, press Join and save the result.
How do I join songs with a crossfade?
On tuul.io/audio-joiner/, choose Between files, Crossfade, 2 seconds or 5 seconds, then press Join. Each song fades out while the next fades in; the joined file is shorter by the fades, and it's saved once as MP3 at the best bitrate among the songs.
Why does one recording sound much quieter than the others after joining?
Joining doesn't change the volume of each file. Tick Even out the volume on tuul.io/audio-joiner/ to measure every file's loudness (the EBU R128 way) and bring them all to the same level, as loud as they can be without clipping.
Will the joined file keep the title and album art?
No. A joined file is a new recording, so tuul.io leaves the tags and cover pictures of the separate files out. Add a title or cover afterwards in your music app if you need one.